Self-adhesive SBS-modified bitumen membrane with composite reinforcement
The membrane is eqipped with an additional torch-on selvedge to torch the side laps (e.g. if the temperature is below the recommended minimum application temperature). This prevents the below layer from thermal damages by torching.
Sand with, 8 cm selvedge (foil) on both sides
Full adhesive (peel-off-foil) with 6 cm selvedge (sand)
Self-adhesive method with / without thermal activation
Side laps min. 8 cm, end laps min. 10 cm overlap
Temperature for application min. + 10 °C (Self-adhesive method)
EN 13707, EN 13969
bueho.pdf.product.packaging_size
| bueho.website.product.attribute.description | bueho.website.product.attribute.norms | bueho.website.product.attribute.unit | bueho.website.product.attribute.value |
|---|---|---|---|
| Length | EN 1848-1 | m | 10,0 |
| Width | EN 1848-1 | m | 1,00 |
| Straightness | EN 1848-1 | mm/10m | < 20 |
| Mass per unit area | EN 1849-1 | kg/m2 | NPD |
| Thickness | EN 1849-1 | mm | 4,0 |
| Watertightness | EN 1928 | kPa | 100 |
| External fire exposure | EN 13501-5 | Klasse | NPD |
| Reaction to fire test | EN 13501-1 | Klasse | E |
| Shear resistance of joints | EN 12317-1 | N/50mm | NPD |
| Tensile force long./trans. | EN 12311-1 | N/50mm | 1200/1000 (±200±/200) |
| Elongation at single-end breaking force | EN 12311-1 | % | 10/10 (±-5/±5) |
| Resistance to impact | EN 12691 | mm | NPD |
| Resistance to static loading | EN 12730 | kg | NPD |
| Resistance to tearing (nail shank) long./trans. | EN 12310-1 | N | 200/200 (±50/±50) |
| Dimensional stability | EN 1107-1 | % | ≤ |0,3| |
| Flexibility at low temperatures | EN 1109 | °C | -25 |
| Flow resistance at elevated temperature | EN 1110 | °C | 100 |
| Water vapour transmission | EN 1931 | µ | NPD |
bueho.pdf.product.npd
